Bitumen Emulsion CSS1 or Cationic Slow Setting type bitumen emulsion is a type of non hazardous liquid bitumen which consists of approximately 40% water and cationic emulsifiers and different types of additives and 60% bitumen penetration grade or viscosity grade bitumen.
The HS Code of Bitumen Emulsion CSS1 is 27149090 and it can be produced and evaluated based on the tips of the ASTM D 2397 M-13 standard.
Read more about Bitumen Emulsion CSS1 in the below.
Bitumen Emulsion CSS1 Latest Price
| Bitumen Emulsion CSS1 Price (Reconditioned Drum) | |
|---|---|
| Port | Price |
| FOB Middle East | 525 ± 5$ |
April 22, 2024 | |
The Specification of CSS1
In the factory lab, after performing essential cationic bitumen emulsion tests, the data sheet will be prepared. The technical data sheet of bitumen emulsion CSS1 which Infinity Galaxy supplies, is as below:
| Bitumen Emulsion CSS1 Specifications | ||
|---|---|---|
| Specification | Test Method | Value |
| Binder Content or Bitumen Residue (%) | ASTM D6997 | ≥60 |
| Cement Mixing Test (%) | ASTM D6935 | ≥2 |
| Storage Stability in 24-H (%) | ASTM D6930 | 1≥ |
| Sieve Test (%) | ASTM D6933 | 0.1≥ |
| Viscosity Saybolt Furel At 50 °C | ASTM D7496 | ≥20 |
| Demulsibility, 35 ml. 0.8% Dioctyl Sodium Sulfosuccinate (%) | ASTM D6936 | ≥40 |
| Oil Distillate Content (%) | ASTM D6997 | 8≥ |
| Tests On Residue From Distillation Test | ||
| Penetration, At 25 °C, 100 gr on 5 sec (0.1 mm) | ASTM D5 | ≥50 |
| Ductility, At 25 °C, 5 CM/Min | ASTM D113 | ≥40 |
| Solubility in TCE, WT% | ASTM D2042 | ≥97.5 |
Bitumen Emulsion CSS1 Tests
To become sure about the quality of different types of bitumen emulsion, several types of bitumen emulsion tests can be applied on them. In the below, the main bitumen emulsion tests that are done on CSS1 are clarified:
- Residue by Evaporation Test
- Sieve Test
- Saybolt Viscosity Test
- Distillation Test
- Storage Stability Test
- Density Test
If you would like to read the details of each tests, visit the page Bitumen Emulsion Test
International Inspection
Besides the bitumen emulsion tests in the factory, an agent from an international inspection company like SGS or Geo-Chem as a third notify party will attend in the customs and take samples of the product. Then the sample of bitumen emulsion CSS1 will be tested and after confirming the parameters, the quality of CSS1 is approved and it can be exported without any issue.
Bitumen Emulsion CSS1 Packing Type
Bitumen Emulsion CSS1 can be packed in different types of packing. Since this bitumen is liquid bitumen and it is a combination of different materials, it is important to use a suitable type of packing that is not subjected to environmental conditions and the product will not be damaged.
The suitable packing for bitumen emulsion CSS1 are as below:
- New Steel Drum
- Barrel
- IBC
- Flexi tank
- Reconditioned drums
Infinity Galaxy supplies bitumen emulsion CSS1 in different types of new steel drums based on the customer’s request.
Bitumen Emulsion CSS1 Payment Term
The payment term is the TT method. It is required to pay the 50% advance and balance against the bill of lading draft.
Bitumen Emulsion CSS1 Advantages
- Since this type of bitumen consists of water, it is eco-friendly compared to cut back bitumen which consists of petroleum base solvent.
- It has a good adhesion property which can be used in protective asphalts to maintain and repair the asphalt surface on the road.
- It is long lasting and durable. It can penetrate into the cracks well.
- It doesn’t require any heat before using.
- It can be applied on surfaces that are wet and damp. It can be used in the rainy weather and humidity.
- It is economical compared to cut back bitumen. Generally, this type of bitumen is a good substitute for cut back bitumen.
Bitumen Emulsion CSS1 Handling and Storage
There exists different ways to store and handle the bitumen emulsion.
- To avoid freezing of emulsion water, do not allow temperature to fall below 2°C.
- The emulsion should be stored in storage tanks that will prevent it from freezing or overheating.
- Since emulsion can freeze in the cold weather, it is necessary to have a gentle agitation by blenders in the tank.
- Pay attention to the bitumen emulsion CSS1 temperature not to exceed 100 °C or water boiling point.
- Pay attention to the hoses and connections while handling and transferring the bitumen emulsion from tankers to tanks.
Bitumen Emulsion CSS1 Main Applications
The main applications of bitumen emulsion CSS1 are as below:
- Prime Coat
- Seal Coat
- Slurry Seal
- Fog Seal
- Coating the Pipelines
- Bitumen Sheet Membrane
Infinity Galaxy, Bitumen Emulsion CSS1 Supplier
Infinity Galaxy with more than 10 years of bitumen exporting experience is ready to supply bitumen emulsion CSS1 for customers all over the world.
Since sustainability is playing an active role in every field all over the world, we at Infinity Galaxy decided to focus on supplying bitumen emulsion more than before to maintain the roads beside maintaining the environment.
If you are interested in buying bitumen emulsion CSS1, or you have any further questions about this product, our sales and technical experts are ready to be at your service. Contact us by the below form.
