Topic:
Sort by:
Bitumen
LatestLoss on Heating Test of Bitumen
Loss on Heating Test of Bitumen
Mona Zahedi
• November 4, 2021
The loss on heating test determines the volatile component of bitumen. To perform this test, 50 g of bitumen sample […]
• November 4, 2021Definition of Bitumen Flash and Fire Point Test and its Procedure
Definition of Bitumen Flash and Fire Point Test and its Procedure
Mona Zahedi
• November 1, 2021
During the heating of flammable or combustible material, vapor is generated near its surface. The flash point test measures the […]
• November 1, 2021Float Test of Bitumen Purpose and Procedure
Float Test of Bitumen Purpose and Procedure
Mona Zahedi
• November 1, 2021
The float test of bitumen is used for measuring the consistency or ability of bitumen to flow. The consistency of […]
• November 1, 2021Bitumen Specific Gravity Test; Definition and Procedure
Bitumen Specific Gravity Test; Definition and Procedure
Mona Zahedi
• October 24, 2021
A specific gravity test measures how much lighter or heavier bitumen is compared with the same volume of water. There […]
• October 24, 2021An Overview of the Ductility Test of Bitumen, Its Purpose, and Procedure
An Overview of the Ductility Test of Bitumen, Its Purpose, and Procedure
Mona Zahedi
• October 19, 2021
What is Ductility Test of Bitumen ? Ductility is one of the important properties of bitumen that shows the capability […]
• October 19, 2021
Bitumen Flexitank Specification and Advantages
Bitumen Flexitank Specification and Advantages
Mozhdeh Darbandizadeh
• October 17, 2021
Bitumen Flexitank Definition Flexitank is a type of bitumen and liquid petrochemical packing. It is suitable for non-corrosive and non-hazardous […]
• October 17, 2021 The Softening Point Test of Bitumen – Ring and Ball Method Procedure
The Softening Point Test of Bitumen – Ring and Ball Method Procedure
Mona Zahedi
• September 7, 2021
Bitumen is a complex material that does not have a distinct melting point. As the temperature rises, the bitumen gradually […]
• September 7, 2021
Bitumen Emulsion Definition, Types and Grade
Bitumen Emulsion Definition, Types and Grade
hemati
• August 24, 2021
Bitumen Emulsion Bitumen emulsion is a liquefied type of bitumen with a low viscosity. By dispersing bitumen in water and […]
• August 24, 2021 
Gilsonite or Natural Bitumen Introduction
Gilsonite or Natural Bitumen Introduction
Mozhdeh Darbandizadeh
• August 22, 2021
Gilsonite is the natural bitumen that can be extracted from the mines in the lump form with different ash content. […]
• August 22, 2021 Bitumen Drop in Penetration after Heating Test
Bitumen Drop in Penetration after Heating Test
Mona Zahedi
• August 11, 2021
To perform the test, first, a needle with a 100-gram load is vertically penetrated into the bitumen for five seconds […]
• August 11, 2021Bitumen Penetration Test – Procedure and Purpose [+Video]
Bitumen Penetration Test – Procedure and Purpose [+Video]
Mona Zahedi
• August 2, 2021
Grading bitumen based on physical properties is essential to get the best performance for construction and other uses. The penetration […]
• August 2, 2021Oxidized Bitumen Packing: Meltable Nylon and Carton
Oxidized Bitumen Packing: Meltable Nylon and Carton
Mozhdeh Darbandizadeh
• July 10, 2021
Oxidized bitumen is a solid bitumen, unlike the penetration and viscosity grade bitumen. Based on this reason, it has several […]
• July 10, 2021