CRS 1 or cationic rapid setting type of bitumen emulsion is a type of liquid bitumen that has a low viscosity. It contains about 40% aqueous solution and 60% bitumen. The ingredients of the aqueous solution include water, an emulsifier, and additives.
The fine drops of bitumen are dispersed in water by a cationic emulsifier, which makes bitumen drops positively charged. For this reason, CRS-1 is classified as a cationic bitumen emulsion.
CRS 1 has a rapid setting property. It means that after about 2 hours of applying bitumen to the ground, it dries. For this reason, CRS-1 is widely used in tack coat for road construction.
The HS Code of Bitumen Emulsion CRS-1 is 27150090 and it can be produced and evaluated based on the tips of the ASTM D 2397M-13 standard.
Bitumen Emulsion CRS-1 Latest Price
Bitumen Emulsion CRS-1 Price (Reconditioned Drum) | |
---|---|
Port | Price |
FOB Middle East | 615 ± 15$ |
April 22, 2024 |
The Specification of CRS-1
The table below is the specification of Infinity Galaxy’s CRS-1 cationic bitumen emulsion. The produced CRS-1 must be tested in the laboratory to ensure its characteristics match those in the table below, otherwise, it is not CRS-1.
Bitumen Emulsion CRS-1 Specifications | |||
---|---|---|---|
Specification | Test Method | Min. | Max. |
Binder Content or Bitumen Residue (%) | ASTM D6997 | 63 | – |
Storage Stability in 24-H (%) | ASTM D6930 | – | 1 |
Sieve Test (%) | ASTM D6933 | – | 0.1 |
Viscosity Saybolt Furel At 50 °C | ASTM D7496 | 20 | – |
Particle Charge (None) | ASTM D244-ASTM D7402 | Positive | |
Test On Residue From Distillation Test | |||
Penetration, At 25 °C, 100 gr on 5 sec (0.1 mm) | ASTM D5 | 50 | – |
Ductility, At 25 °C, 5 CM/Min | ASTM D113 | 40 | – |
Solubility in TCE, WT% | ASTM D2042 | 97.5 | – |
Bitumen Emulsion CRS-1 Tests
To become sure about the quality of this type of bitumen emulsion, different types of cationic bitumen emulsion tests can be applied on the bitumen emulsion CRS-1. Below are the main bitumen emulsion tests that are done on this product:
- Residue by Evaporation Test
- Sieve Test
- Saybolt Viscosity Test
- Distillation Test
- Storage Stability Test
- Density Test
Read More about Bitumen Emulsion Tests
International Inspection
While the quality of the product is checked at the factory, it is re-inspected at customs by SGS or Geo-Chem representatives.
After the quality and quantity of the cargo is approved by SGS or Geo-Chem, it is prepared to be delivered to the destination port by the vessel.
Bitumen Emulsion CRS-1 Packing Type
There are several types of packaging for transporting and storing liquid bitumen.
Besides maintaining the emulsion’s stability between the bitumen and water phase, these packages must prevent leakage and control the emulsion’s properties change.
The suitable packings for CRS-1 are as below:
- New Steel Drum
- Barrel
- IBC
- Flexi tank
- Reconditioned drums
Infinity Galaxy supplies bitumen emulsion CRS-1 in different sizes of new steel drums based on the customer’s request.
New steel drums and flexi tanks are two common packings of bitumen. Get more information about them on new steel drum and flexi tank posts.
Payment Term
The payment term is the TT method. It is required to pay the 50% advance and balance against the bill of lading draft.
CRS-1 Application
The main application of CRS-1 is in road construction. It is used as a coat.
In tack coat application, CRS-1 is sprayed on the soil surface before asphalt is poured on the road.
This thin layer of emulsion bitumen is very suitable for clay and sand soils. These types of soils have a negative electric charge. On the other hand, CRS-1 has positive fine drops of bitumen. As a result, CRS-1 can absorb soil particles and maintain them.
Check out the Applications of Bitumen Emulsion in Road Construction
Infinity Galaxy, Bitumen Emulsion CRS-1 Supplier
Since 2012, we have served our customers in all parts of the world by providing quality products at workable prices.
By exporting bitumen products like CRS-1, Infinity Galaxy has impacted the development of transportation in many parts of the world. Currently, we are trying to maintain their quality by supplying CRS-1 to our valued customers.
To place an order or ask questions about CRS-1 bitumen emulsion, you can contact our experts via WhatsApp or the form below.