Bitumen Emulsion K1-70 or Cationic Rapid Setting type bitumen emulsion is a type of hazard free liquid bitumen which consists of approximately 33% water and cationic emulsifiers and different types of additives and 67% bitumen penetration grade or viscosity grade bitumen.
The Bitumen Emulsion K1-70 is compliant with the KS 02-769: 1990 Standards. The HS code of K1-70 is 27150090.
Read more about Bitumen Emulsion K1-70 in the below.
Bitumen Emulsion K1-70 Latest Price
| Bitumen Emulsion K1-70 Price (Reconditioned Drum) | |
|---|---|
| Port | Price |
| FOB Middle East | 555 ± 5$ |
April 29, 2024 | |
The Specification of K1-70
In the factory lab, after performing essential cationic bitumen emulsion tests, the data sheet will be prepared. The technical data sheet of bitumen emulsion K1-70 which Infinity Galaxy supplies, is as below:
| Bitumen Emulsion K1-70 Specifications | |||
|---|---|---|---|
| Specification | Test Method | Min. | Max. |
| Storage Stability in 24-H (%) | ASTM D6930 | – | 1 |
| Sieve Test (%) | ASTM D6933 | – | 0.1 |
| Viscosity Saybolt Furel At 50 °C | ASTM D7496 | 20 | – |
| Particle Charge (None) | ASTM D244-ASTM D7402 | Positive | |
| Distillation | |||
| Oil Distillate, by Volume of Emulsion, % | ASTM D6997 | – | 4 |
| Residue, % | ASTM D6997 | 67 | – |
| Test On Residue From Distillation Test | |||
| Penetration, At 25 °C, 100 gr, 5 sec (0.1 mm) | ASTM D5 | 60 | 250 |
| Ductility, At 25 °C, 5 CM/Min | ASTM D113 | 20 | – |
| Solubility in TCE, WT% | ASTM D2042 | 97.5 | – |
Bitumen Emulsion K1-70 Tests
To become sure about the quality of this different types of bitumen emulsion, several types of bitumen emulsion tests can be applied on them. In the below, the main bitumen emulsion tests that are done on this product are clarified:
- Residue by Evaporation Test
- Sieve Test
- Saybolt Viscosity Test
- Distillation Test
- Storage Stability Test
- Density Test
If you would like to read the details of each tests, visit the page Bitumen Emulsion Tests.
International Inspection
Besides the bitumen emulsion tests in the factory, an agent from an international inspection company like SGS or Geo-Chem as a third notify party will attend in the customs and take samples of the product. Then the sample of bitumen emulsion K1-70 will be tested and after confirming the parameters, the quality of K1-70 is approved and it can be exported without any issue.
Bitumen Emulsion K1-70 Packing Type
Bitumen Emulsion K1-70 can be packed in different types of packing. Since this bitumen is liquid bitumen and it is a combination of different materials, it is important to use a suitable type of packing that is not subjected to environmental conditions and the product will not be damaged.
The suitable packing for bitumen emulsion K1-70 are as below:
- New Steel Drum
- Barrel
- IBC
- Flexi tank
- Reconditioned drums
Infinity Galaxy supplies bitumen emulsion K1-70 in different types of new steel drums based on the customer’s request.
Bitumen Emulsion K1-70 Payment Term
The payment term is the TT method. It is required to pay the 50% advance and balance against the bill of lading draft.
Bitumen Emulsion K1-70 Advantages
- Cost effective and eco friendly compared to cutback bitumen
- High adhesion, long lasting and durable
- Usable on the wet surfaces
Bitumen Emulsion K1-70 Handling and Storage
There exists different ways to store and handle the bitumen emulsion.
- To avoid freezing of emulsion water, do not allow temperature to fall below 2°C.
- The emulsion should be stored in storage tanks that will prevent it from freezing or overheating.
- Since emulsion can freeze in the cold weather, it is necessary to have a gentle agitation by blenders in the tank.
- Pay attention to the bitumen emulsion K1-70 temperature not to exceed 100 °C or water boiling point.
- Pay attention to the hoses and connections while handling and transferring the bitumen emulsion from tankers to tanks.
To know more details about bitumen emulsion handling and storage, check the MSDS.
Bitumen Emulsion K1-70 Main Applications
The main applications of bitumen emulsion K1-70 is in the tack coat and surface treatment. It can be used in the single surface treatment, multiple surface treatment and sand seal.
Infinity Galaxy, Bitumen Emulsion K1-70 Supplier
Infinity Galaxy with more than 10 years of bitumen exporting experience is ready to supply bitumen emulsion K1-70 for customers all over the world.
Since sustainability is playing an active role in every field all over the world, we at Infinity Galaxy decided to focus on supplying bitumen emulsion, which is called green bitumen ,more than before to maintain the roads beside maintaining the environment.
If you are interested in buying bitumen emulsion K1-70, or you have any further questions about this product, our sales and technical experts are ready to be at your service. Contact us by the below form.
